Fresh water standard comply with WHO
Capacity: 1000L/Hour
Salt content: ≤600mg/L
Raw water: sea water
Other basic design condition related
Purpose：Marine and offshore
Power supply：380V，50 HZ，3P
Jinbo Marine
Marine & Offshore Equipment Datasheet
Product Datasheet
Water Treatment Equipment
1000L/H RO water purification system
ZC-FSHB15 Sea Water Reverse Osmosis System: Fresh water standard comply with WHO Capacity: 1000L/Hour Salt content: ≤600mg/L Raw water: sea water Other basic design condition relate...
ISO9001 Supplier
Class Certificate
Export Supply
Key Highlights
Category
Water Treatment Equipment
Standard
EN
Weight / Size
Technical Parameter： Product ： 20m3/day 1000L/H Raw water ： 35000PPM Inl...
Certificate
CCS
We can supply according to your requirement, drawings, class certificate needs, and delivery schedule.
Technical Specifications
Category
Water Treatment Equipment
Model / SKU
1000L-H-RO-water-purification-system
Standard
EN
Weight / Size
Technical Parameter： Product ： 20m3/day 1000L/H Raw water ： 35000PPM Inlet temperature ： 5~35℃ PH value of Raw Water ： 3.0~10.0 Boosting inlet pressure： 0.1~1kg/cm2 (Positive) Salt content of product water ： ≤600PPM Desalination rate ： ≥98.5% Product water pressure ： ≤0.3Mpa Recovery ： ≈25% Power supply ： 380VAC/50HZ/3φ Power consumption ： ≈6.6KW（Include boost pump） Control cabinet： 220VAC Control voltage:
Certificate
CCS
Warranty
12 Months unless specified otherwise
Origin
China
ZC-FSHB15 Sea Water Reverse Osmosis System:
System Function:
1. Sea water 35000-38000ppm, for desalinating sea water into fresh water 600ppm
2. Whole system under control and monitoring via Automatatical.
3. Semi-automatic cleaning and back-flushing system equipped for sand filter,
4. There is over-pressure protection available for high pressure pump, when pressure is over 6.5Mpa, the system will shut down automatically.
High pressure pump equipped with low-pressure protection device, when pre-treated sea water pressure is less than 0.05Mpa, the system will shut down automatically and give alarm for attention.
5. Working parameter (product flow, brine flow, operation pressure, product water conductivity)
6. If the product water is unqualified (salt content more than 700ppm), the system will drain automatically and give alarm for attention.
7. Potential-free alarm and running indication available for extension.
Technical Parameter：
| Product ： | 20m3/day 1000L/H |
| Raw water ： | 35000PPM |
| Inlet temperature ： | 5~35℃ |
| PH value of Raw Water ： | 3.0~10.0 |
| Boosting inlet pressure： | 0.1~1kg/cm2 (Positive) |
| Salt content of product water ： | ≤600PPM |
| Desalination rate ： | ≥98.5% |
| Product water pressure ： | ≤0.3Mpa |
| Recovery ： | ≈25% |
| Power supply ： | 380VAC/50HZ/3φ |
| Power consumption ： | ≈6.6KW（Include boost pump） |
| Control cabinet： | 220VAC |
| Control voltage: 220VAC | |
| IP: IP55 | |
| Potential-free extension for running indication and common alarm available. | |
| Motor ： | IP： IP55 |
| Insulation class: “F” |