Back to product Download PDF
Jinbo Marine
Marine & Offshore Equipment Datasheet
Product Datasheet

Centrifugal Pump

1.5GCJ-5 Single Suction Multi-stage Marine boiler feedwater pump

General Description Type 1.5GCJ pump is centrigugal pumps of single suction and multi-stage segmental type which can be used to transport clean water and liquids with physical and chemical nature similar to water.The ...

ISO9001 Supplier Class Certificate Export Supply
1.5GCJ-5 Single Suction Multi-stage Marine boiler feedwater pump

Key Highlights

Category
Centrifugal Pump
Standard
DIN
Certificate
ABS, LR, BV, DNVGL, NK, KR, IRS, RMRS, CCS
We can supply according to your requirement, drawings, class certificate needs, and delivery schedule.

Technical Specifications

Category
Centrifugal Pump
Model / SKU
1-5GCJ-5-Single-Suction-Multi-stage-Marine-boiler-feedwater-pump
Standard
DIN
Surface
Rotor of the pump is composed of shaft.impellers.sleeves,and balancing disk,The two ends are supported by the ball-bearings Paper gaskets are used on the contacting surfaces between the suction casing.mid-segment and discharge casing of the pump.They are sealed by tightening the bolts.
Certificate
ABS, LR, BV, DNVGL, NK, KR, IRS, RMRS, CCS
Warranty
12 Months unless specified otherwise
Origin
China

General Description

Type 1.5GCJ pump is centrigugal pumps of single suction and multi-stage segmental type which can be used to transport clean water and liquids with physical and chemical nature similar to water.The liquid temperature is not higher than 110 ℃ .It is suitable for water feeding to boilers,and water supplying to factories and cities.
Designation of 1.5GCJ — 5 × 6
1.5 —— Suction diameter(mm)divided by 25 , and then change the Value into integer
G —— Boiler feed pump
C —— Indicating type of te pump
J —— Mechanical seals
5 —— Specific speed divided by 10 (i.e.the specific speed of the pump is 50)
6 —— Number of impellers
1 、 Sleeve nut 2 、 Bearing Cover
3 、 Bearing 4 、 Bearing body
5 、 Sleeve 6 、 packing gland
7 、 Sealing machine 8 、 Suction casing
9 、 Wearing ring 10 、 Impeller
11 、 Midsegment 12 、 Balance pipe
13 、 Discharge casing 14 、 Balancing ring
15 、 Balancing disk 16 、 End cover
17 、 Sleeve 18 、 Tightening
19 、 Pump shaft 20 、 Round nut

The directions of suction and discharge of the pump are all vertical and upward .with different stages selected according to the needed head.
Stator of the pump is composed of suction casing .mid-segment.discharge casing .end cover and bearing body.
Rotor of the pump is composed of shaft.impellers.sleeves,and balancing disk,The two ends are supported by the ball-bearings
Paper gaskets are used on the contacting surfaces between the suction casing.mid-segment and discharge casing of the pump.They are sealed by tightening the bolts. ○ -rings are mounted on the interfaces between the sleeves to prevent water from entering the bearnjngs. ○ ilimmersed machine is sealing at the two ends the pump.
There are water cooling jackets around the bearing housings.when the temperature of liquid is higher than 80 ℃ ,Cooling water should be turned on to cool the bernings.
Calcium grease lubricant is firled into the bearing thrugh oil-cups.
Viewing from the direction of the suction casing .the pump is rotating clockwise


No.of
stages
Q
Rate of flow

Total Head
H(m)

Rotating
Speed
r/min
Power(kw) n(%)
Eficiency
n(%)
Permissble
sution hed
Hs(m)
OD.of
Impeller
(mm)
m3/hr
L/Sec
Shaft powe Moterpower
2
3
4
5
6
7
8
9
6
6
6
6
6
6
6
6
166
166
166
166
166
166
166
166
46
60
92
115
138
161
184
207
2950
2950
2950
2050
2950
2950
2950
2950
2
3
4
5
6
7
8
9
1.5GCJ-5 Single Suction Multi-stage Marine boiler feedwater pump
55
75
75
75
11
15



38
65
65
65
65
65
65
65
65
136
136

126
36
136
136
136
136