Chain Chaser
It is for use with deep-penetration twin shank anchors. The J-shape permits catching the anchor chain after the anchor has been installed. This means that this chaser can be used to assist in unforeseen circumstanc...
It is for use with deep-penetration twin shank anchors.
The J-shape permits catching the anchor chain after the anchor has been installed. This means that this chaser can be used to assist in unforeseen circumstances.
The well-balanced and 'guiding' design of the chaser enables catching the chain when the chaser approaches a mooring at the point where the catenary angle is as high as 45 degrees.
1.Excellent quality and competitive price .
2.Durable, long lifetime.
3. Standard or customerized.
Remark:
It is attached by a work wire to the winch of the anchor handling tug and at approximately 1/3 of the water depth.
After "snagging" the anchor chain, is towed into contact with the anchor shank and flukes enabling the tug to lift and board the anchor .
It will handle anchors to 30 tones in weight and stud link chain up to 4-1/2 inches diameter.
| J Lock Chain Chaser | ||||||||||
| Nominal Size(mm) | Pull Load (Ton) | SWL(Ton) | Dimensions (mm) | Weight(kgs) | ||||||
| A | B | C | D | E | F | G | ||||
| 76 | 300 | 200 | 2083 | 1520 | 711 | 533 | 124 | 115 | 110 | 2600 |
| 84 | 300 | 200 | 2083 | 1520 | 711 | 533 | 124 | 115 | 130 | 2600 |
| 102 | 500 | 300 | 2480 | 2050 | 711 | 800 | 180 | 150 | 140 | 4200 |
| 117-124 | 600 | 450 | 2730 | 2050 | 711 | 1000 | 240 | 185 | 150 | 7650 |
