Marine Equipment
LP312A Ex-proof Perimeter Light
Product Description The LP3 series ex-proof perimeter lights are used to mark the boundaries of offshore helipads, mobile platforms and fixed platforms. They are suitable for e...
LP312A Ex-proof Perimeter Light
PDF Datasheet
We can supply according to your requirement.
Product Description
The LP3 series ex-proof perimeter lights are used to mark the boundaries of offshore helipads, mobile platforms and fixed platforms. They are suitable for explosive gas environments of IIA, IIB, IIC and temperature groups T1-T6 in Zone 1 and Zone 2 locations, such as offshore oil platforms, oil tankers and other hazardous areas and helicopter pads on ships.
Product Features
Stainless steel 316 light housing, with corrosion and vibration resistant features, IP protection can be IP67, suitable for hazardous outdoor environment.
Professional photometric design, use the high and low temperature resistant PC lens to make sure can be long term photometric qualified.
Tempered glass light cover, operation temperature can be-50℃, with 4J shock resistance, hot and cold upheaval resistance and 5Mpastatic pressure qualified features.
Lamp is using LED light source，design with professional heat simulation software to make sure the chips’ temperature will lower than 85℃ when operation to make sure the stable light illuminations.
With Dimming function, can use the PWM or RS485(0-100)to be stepless dimming to avoid light dazzle when pilot approaching.
Electrical
Operating voltage 24VDC
Power consumption ≤5W
Dimming mode PWM 2-M20x1.5（It needs to be used in conjunction with the appropriate explosion-proof connectors）
Wiring EMC
GD22-2015 L-L ±0.5kV
GD22-2015 L-G ±1kV GD22-2015
contact discharge±8kV
GD22-2015 air discharge±
Mechanical
Housing material SUS316
Cover material Tempered glass
Weight 4.3kg
Mounting Surface mount
Operating temperature -
50℃ ~ +60℃ Storage temperature-50℃ ~ +70℃
perating humidity 10%~95%RH
IP rate IEC60529 IP67
Salt spray rate ISO9227 NSS 1440h
