Marine Equipment
Brass Needle Angle Valve with Ring Joint Nut at Outlet
Brass Needle Valve is used to connect the copper tubing, control the flow of liquids or gas requiring close regulating. Made of brass rods and brass except for "O" rings. Technical Spe...
Loading product images...
Brass Needle Angle Valve with Ring Joint Nut at Outlet
PDF Datasheet
We can supply according to your requirement.
China Brass Needle Angle Valve with Ring Joint Nut at Outlet:
Brass Needle Valve is used to connect the copper tubing, control the flow of liquids or gas requiring close regulating. Made of brass rods and brass except for "O" rings.
Technical Specification:
1. Applicable temperature will be -20℃ to 100℃
2. Max Pressure: 3.43Mpa (35kgf/cm2)
3. Recommended for use at less than 80% of max load pressure at temperature between 80℃ and 100℃.
Main Size(mm):
| IMPA | Nominal Size | OD of Tube | Thread | Height | Length | |
| Ring Joint Side | Male Thread | |||||
| 752116 | 6 x 1/8 | 6 | PF-1/4 | PT-1/8 | 55 | 27 |
| 752117 | 6 x 1/4 | 6 | PF-1/4 | PT-1/4 | 58 | 27 |
| 752118 | 8 x 1/4 | 8 | PF-3/8 | PT-1/4 | 65 | 28 |
| 752119 | 10 x 3/8 | 10 | PF-3/8 | PT-3/8 | 73 | 34 |
| 752120 | 12 x 1/2 | 12 | PF-1/2 | PT-1/2 | 76 | 38 |
| 752121 | 14 x 1/2 | 14 | PF-1/2 | PT-1/2 | 76 | 40 |
