RDQJ-2 Suction type Gas Detection System

The device is consists of flammable gas detection cabinet, flammable gas alarm and control panel,
Extension alarm panel and suction pipe channels. Except sending out the alarm when concentration of
Detected gas reaches or exceeds the pre-set value, RDQJ-2 Suction Gas Detection System also designs
With the monitoring and alarm functions for equipment itself such as the power failure and fault of
Detection lines. At the same time, system also monitors the gas concentration inside the Detection
Cabinet itself. The system will override the sample point and stop the detecting of this point as soon as
This sample point found the fault and alarm. All alarms occurred will be saved for further reference.

Technical Specification
Power supply: AC220V 50Hz (Main power)
DC24V (Back-up power)
Sample object: Combustible gas in air
Normal working pressure (suction): -30kPa
Sample points: ≤ 60 route
Alarm value: 25% (measuring panel inner)
Accuracy:≤ ±5％LEL
Air source pressure: 0.2MPa
Response time: ≤15s