Marine Equipment
CP-63A Pipeline Oil Contamination Detection Transmitter
Product Description: This system consists of oil contamination detection pot,capacitive alarm switch,ball valve and pipeline unit.This device is installed in the cooling water line sys...
CP-63A Pipeline Oil Contamination Detection Transmitter
We can supply according to your requirement.
Product Description:
This system consists of oil contamination detection pot,capacitive alarm switch,ball valve and pipeline unit.This device is installed in the cooling water line system of ship,use for detect oil in cooling water,capactive alarm switch install on the upper part of the oil contamination detection pot, its detection head was located in the rest of liquid exit, near to the stop valve. When throttle slice was remain the throttle position, the water inside of pipe will enter into the detection pot, if the water contain oil contaminatioin, it will float on the inspection head of alarm switch, the alarm switch will output oil contamination alarm signal.
Main Technical Specification:
Maximum pressure:0.5Mpa
Maximum temperature: 150 centigrade, 200 centigrade
Flow: 100 to 300 L/hour
Sensitivity Approximate 50ml oil
Power supply: AC 110V/220V
Output: relay output (DPDT)
Principle Pipe diagram: