RDLM-02-EP Electric-Pneumatic Type Level Gauge with Draft Gauging System
Working principle
The operating principle is basically same as air-purge type level gauge and convert pneumatic
Pressure to 4~20mAthrough electric indicator and E/P converter. The 4~20mA...
RDLM Series Level Monitoring and Alarm System1 PhotosISO9001 Supplier
Loading product images...
RDLM-02-EP Electric-Pneumatic Type Level Gauge with Draft Gauging System
The operating principle is basically same as air-purge type level gauge and convert pneumatic Pressure to 4~20mAthrough electric indicator and E/P converter. The 4~20mA signal is sent to Automation system, where the calculations for levels or drafts are done.
Tech. Spec.
Power supply: AC220V/50Hz, AC110V/60Hz Sounding pipe: 6X1, 8X1, 10X1 seamless steel pipe Power consumption: 5W/point Signal pipe: 6(or 8) X1 copper pipe Air source pressure: 0.4 0.7MPa Measurement range: 0 20m Air consumption: 10L/channel System accuracy: 1%FS Blind zone: 100mm Working pressure: 0.3MPa Ambient temperature: 0 +60degree Output signal: 4~20mA, Rs485 Type approval: CCS, GL, NK
Characteristic
Advanced technology, self-checking for sensor and system RS485 connect with PC and show various data with visual pattern E/P converter is RDLY Pressure transmitter which is high accuracy and stable performance High/ low level alarm and ultimate high/low alarm, with audio-visual alarm Revise the fault of measured specific gravity Has flush sounding pipe function
PDF Datasheet
